How to replace the TILT Mechanism in your chair (Step-by-Step Guide)
Share
Is your office chair no longer rocking the way it used to? Or maybe the tilt function stopped working altogether? Don’t worry — replacing the TILT mechanism is easier than you might think, and it’s a great way to give your chair a new life without buying a whole new one.
✅ Step-by-Step Instructions:
1. Turn the Chair Upside Down
Place the chair on a flat surface and carefully flip it over so the base is facing up. This gives you easy access to the underside of the seat.
2. Remove the Chair Base
If you haven’t already, detach the chair base (wheels and gas lift). You may need to tap it gently with a rubber mallet to loosen the gas lift from the mechanism.
3. Unscrew the Old Mechanism
Using a screwdriver, remove the screws holding the old tilt mechanism to the seat. Be sure to keep the screws if they’re in good condition — you’ll need them for the new one.
4. Attach the New TILT Mechanism
Align the new mechanism with the mounting holes. Secure it using the original screws or new ones if provided.
5. Reattach the Gas Lift and Base
Insert the gas lift into the base and put on new mechanism’s socket with the rest of the seat. Sit down gently to lock everything into place.
6. Test the Functionality
Try adjusting the tilt resistance and test the rocking motion. Lock it in the upright position if needed. Everything should feel smooth and secure.
🛠️ Pro Tips:
-
If any parts feel loose, tighten the screws or bolts again after the first few uses.
-
For maximum comfort, adjust the tilt tension knob to your preferred resistance.
🎯 Why Replace Instead of Replacing the Whole Chair?
Swapping out a worn mechanism is more affordable, eco-friendly, and often faster than shopping for a brand-new chair. With a solid part like our TILT rocking mechanism, your chair can feel like new again — in just a few minutes.